Christie Digital Systems / M & J series / Updating the projector.
Updating the M & J series projector.
Upgrade can be done through the web interface.
1. Login to webpage.
2. Go to Admin Page.
3. Activate upgrade mode. Note: Projector must be in standby.
4. Click on Upgrade. Wait for UI to change.
5. Select software file type and browse for the latest software file ( Latest software files can be found in Christie Website ).
6. Click UPLOAD.
7. Wait for the software upload to finish.
Related Articles
Christie Digital Systems / GS-series / Enable UST lens
Issue: Reported that the projector have only half the screen in the display. Image also appears blurry and out of focus after adjusting the bore-sight. Resolution: Kindly enable the UST lens option when installing projectors with UST lens. You can ...
Christie Digital Systems / Boxer / HDMI Input Fault
Related Products: Christie Boxer 2k30 Description: Christie Boxer which shows problems with the HDMI input on the HBMIC card Log Error: "Option Card 1 Initialization Fault (SYST:054)" Resolution: 1. Check Card is Seated 2. Upgrade Projector firmware ...
Christie Digital Systems / HD10K-M / Flickering Vertical Lines
Issue: Projector is experiencing flickering vertical lines. Flickering is also present in the internal test patterns. Signal coming from the source are being interrupted as well. Resolution: Faulty image processor card (108-315101-01) can cause this ...
Christie Digital Systems / 4K10-HS / Out of focus
We've received your report regarding the projector (4K10-HS) having some issues with the focus. Christie 4k10-HS Lens: 0.85-1.02:1 Confirm if the lens calibration has been done before using the projector and lens cap has been removed from the lens ...
Christie Digital Systems / Boxer / Interrogator file
interrogator file for boxer Running the Boxer interrogator The interrogator captures diagnostic information Christie personnel uses to help diagnose and correct any issues. 1. Insert a USB flash drive in the USB port on Boxer 2K. If two USB flash ...