Christie Digital Systems / Boxer / HDMI Input Fault

• Related Articles

• Christie Digital Systems / Boxer / Interrogator file

  interrogator file for boxer Running the Boxer interrogator The interrogator captures diagnostic information Christie personnel uses to help diagnose and correct any issues. 1. Insert a USB flash drive in the USB port on Boxer 2K. If two USB flash ...

• Christie Digital Systems / LWU530-APS / Faulty HDMI

  Issue: HDMI is connected but image is not coming.  Can't detect any source. Troubleshooting: Check with a different source and see if other inputs can be detected. If not, the issue is most likely the main board of the projector and it needs ...

• Christie Digital Systems / Roadster / Removing Lamp

  Removing the lamp for Roadster projector. 1. TURN THE LAMP OFF  Press (power) to turn the lamp off. Allow the cooling fans to stop automatically (within approximately five minutes) before proceeding with Step 2. This wait period is also required to ...

• Christie Digital Systems / GS-series / Enable UST lens

  Issue: Reported that the projector have only half the screen in the display. Image also appears blurry and out of focus after adjusting the bore-sight. Resolution: Kindly enable the UST lens option when installing projectors with UST lens. You can ...

• Christie Digital Systems / Phoenix Node / Backchannel Sync Error

  Issue: Individual screens of display wall flashing from content to black Troubleshooting: - Check backchannel sync connector lights as per user manual - Check backchannel sync cabling - Identify which node is causing the sync sync issue by rebuilding ...