Christie Digital Systems / LWU530-APS / Faulty HDMI

Christie Digital Systems / LWU530-APS / Faulty HDMI

Issue:
HDMI is connected but image is not coming. 
Can't detect any source.

Troubleshooting:
Check with a different source and see if other inputs can be detected.
If not, the issue is most likely the main board of the projector and it needs servicing.

    • Related Articles

    • Christie Digital Systems / Boxer / HDMI Input Fault

      Related Products: Christie Boxer 2k30 Description: Christie Boxer which shows problems with the HDMI input on the HBMIC card Log Error: "Option Card 1 Initialization Fault (SYST:054)" Resolution: 1. Check Card is Seated 2. Upgrade Projector firmware ...

    • Christie Digital Systems / FHD553-XE / Faulty Power Supply

      Issues: Power is available but no display. Led status: Blinking Orange. Possible Causes: Faulty Power Supply. Troubleshooting: Checked the outlet is working. Try different power source.  Change the power cords.  Check the switch, buttons and remote.  ...

    • Christie Digital Systems / Boxer / Interrogator file

      interrogator file for boxer Running the Boxer interrogator The interrogator captures diagnostic information Christie personnel uses to help diagnose and correct any issues. 1. Insert a USB flash drive in the USB port on Boxer 2K. If two USB flash ...

    • Christie Digital Systems / Phoenix Node / Green LED Status

      Issues: Green Led Status (Not indicated in the service manual) No Display on the video wall. (Frozen or No Connection) Possible Causes: Disconnected to the controller. Network Configuration issue. Faulty Unit Experiences: DEWA Site Visit - Nodes ...

    • Christie Digital Systems / M & J series / Updating the projector.

      Updating the M & J series projector. Upgrade can be done through the web interface. 1. Login to webpage.  2. Go to Admin Page.  3. Activate upgrade mode.  Note: Projector must be in standby.  4. Click on Upgrade. Wait for UI to change.  5. Select ...